Tuesday 11 October 2011

Caterham Academy 2012 - Build (Day 11)

Day 11:

I was waiting for my new handbrake cable to arrive from Caterham this morning, so got on with some of the other interior jobs whilst waiting for the postman to turn up in rural Hertfordshire.

I started with the boot cover, which looked like a 30 minute job, but took me all morning in the end. I took my time to make sure I got everything was lined up properly and that I didn't miss-drill any of the holes required for the harness fixings or the poppers around the side and back of the boot. Measuring, drilling, fixing, re-measuring etc. took plenty of time, but was well worth the effort, with a nice tight fitting achieved. It also required me to un-do the roll cage to enable the outermost harness fixings to be secured, so I was going over old ground for some of the morning.

I then moved onto the harnesses, which went on without too much of a fight, although it took me a while to work out how to get the crutch straps attached. The postman arrived just after lunch, but I decided to crack on with the interior and get the seats fitted. This didn't go quite according to plan, with the passenger seat putting up quite a fight. I got the rails attached to the base OK, but managed to cross-thread one of the bolts into the rail when trying to fit the seat into the car. To cut a long story short I had to cut the bolt out and will have to order some new fixing rails.....not great.

It was at this point I decided to get the new handbrake cable in and the diff bolted up into position. After all of the faffing around over the last few days this actually took me less than an hour, so was a good note to end on. This means I can crack on with the rear suspension whilst I order some new mounting brackets for the passenger Tillet seat, so although pissed off with myself at making a mess of it, it doesn't stop me from making progress with the build. Here is hoping that the rear suspension goes together without too many issues.






2 comments:

  1. Alex - you don't need the passenger seat - it only adds weight..

    ReplyDelete
  2. Wow , it is really coming together fast !

    ReplyDelete